STEP # 1
Install top of awning to side panels . Using screws provided , attach through pre-drilled holes.
(WE RECOMMEND WEARING SAFETY GLASSES ANYTIME YOU ARE WORKING WITH TOOLS)
STEP # 2
Drill female section of HANGING RAIL, on approximately 12 inch centers. Level and install loosely on wall, above door or window. Insert awning into position, then tighten female HANGING RAIL to wall.
STEP # 3
Drill back brace tube of side panel, place screw through drilled brace tube and screw to wall.
CONGRATULATIONS !!! JOB FINISHED !!!
